One Source/Total Answer
Determine the Need, Engineer the Solution, Design the Answer, Fabricate / Machine the Product, Deliver to the Jobsite, Install, Calibrate and Maintain.
TRIVACO can integrate a complete solution to your VALVE, ACTUATOR or CONTROLS issues starting with our complete ENGINEERING & DESIGN department. Our engineers can survey your needs, design a solution and procure or manufacture the best products available (valves, actuators, control systems) to fit the application. Our field service technicians can install and calibrate to ensure the valve package will work as promised. And our TVM personnel can monitor and maintain the valve package to ensure maximum life and productivity.
TRIVACO Fabricating and Machining Capabilities
Machining
Our state of the art 3 axis CNC machining center has a travel capacity of 40 inches in the X direction, 20 inches in the Y direction and 20 inches in the Z direction allowing large parts to be machined to tolerances as small as .0002 inch. The machine also utilizes a 20 tool capacity automatic tool changer. The milling head alone is powered by a 20 horsepower motor. The table is capable of traveling at as much as 1000 inches per minute. These features as well as offline programming and large capacity program storage allow us to be very efficient and productive.
Joining our large machining center is a smaller version that has many of the same features as the larger machine. This machine gives us the added capacity and ability to manufacture parts on a very quick turn around time and maintain the quality provided by CNC machines.
We also utilize manual vertical and horizontal mill machines.
Turning is accomplished on any of 3 lathes that give us the ability to turn parts as large as 40 inches in diameter. All machines have digital readouts in all directions providing accurately machined parts.
Internal keying is done on our automatic keyseater or by use of a broach.
Cutting is done on our fully automatic saw, cutoff saw, or bandsaw.
A surface grinder is used to achieve near perfect flatness or squareness when required.
Welding
Welding is done by any of several processes that include Oxyactylene (gas), SMAW (stick ac and dc), GMAW (mig), and FCAW (flux core mig). A welding positioner helps assure that the best position for each weld is used.
